ADVANTAGES OF THE TÄBY PRESS	TYPES 55, 70, 90

t	Direct drive, no belts or chains between the drive unit and the 
	press part.
t	Bauer geared motor. Helical gears in the gear box, of industrial 
	quality.
t	Hardened press components, even those which are not wear parts, 
	provide improved durability when dismantling.
t	Low cost for wear parts. The press tube is of simple design with
	no threads.
t	The press screw can be repaired, which means low wear costs. It is
	 case-hardened, not just hard chromium plated.
t	Reversible press tube, provides even wear and longer service-life.
t	The press tube is prepared for oxygen-free oil pressing. There is 
	an O-ring groove in the press tube.
t	Press tubes are inexpensive. Therefore several press tubes can be 
	kept in stock for different types of seed.
t	Exchangeable nozzles. Simple design, no threads. Low price.
t	Seed cakes of the pellet type.
t	No threads in the press tube which could otherwise become clogged 
	up with dried linseed oil and leftover seeds, making the press tube
	 difficult to dismantle. Having no threads also means it is easier 
	to assemble without having to worry about seeds getting caught in 
	threads.
t	A magnet in the seed hopper prevents metal getting into the press.
t	Transparent inlet pipe provides the best view. A sensor can be 
	mounted in the inlet pipe to the hopper.
t	The bearing housing has standard bearings which means low cost ball
	 bearings.
t	Overload protection is provided by means of a break pin.
t	The variator is by means of a static frequency changer, which means 
	no mechanical wear, etc.
t	Soft start, the rotation speed rises to the motor on-speed gradually
	 without jerking.
t	A toothed coupling between the gears and the oil press provides a 
	soft power transition.
t	Reversing option, useful when you want to dismantle the press head, 
	etc., and if a foreign object becomes lodged in the unit.
t	A display shows amps, rotation speed, volts and Hz.
t	Fault location capability via the display, the four most recent 
	faults triggered are stored.
t	Overheating protection 150 oC on the press head. Low current, 24 
	volts, in the cable, for safety purposes.
t	A heating collar with a thermostat provides good starting up without
	 the need to change nozzles or to heat by using an external heat 
	source, for safety reasons etc.
t	Heat is provided via the heated collar; useful for pressing very 
	cold seed in the winter.
t	The robust electrical cabinet complies with CE and EMC norms.
	Screened electrical cables. The sheet steel cabinet protects the 
	electrical components. A sighting glass allows inspection without 
	opening a cover.
t	There is room for an instruction book etc. in the electrical cabinet.
t	There is an earth fault contact breaker in the electrical cabinet 
	for safety purposes.
t	There are fuses in the electrical cabinet.
t	The press is divided into three parts: the electrical cabinet, 
	a pressing unit and the motor gear unit. This facilitates servicing.
t	Standard components, manufactured in the West, are easy to service 
	and can be obtained quickly.
t
t	The oil presses are not heavy. Type 55 weighs 62 kg. Their small 
	size means that the press is easy to position
t








	Skeppsta Maskin AB